Printer's Parts Store, Inc.

1708 NW 1st ST      Oklahoma City, OK 73106

405-272-0272     800-375-3787     405-232-3053 (FAX)    ppsokc@aol.com  

 

Olden Enterprises

 Home Parts Used Equipment New Equipment Motors Motor Controls Reducer Products Downloads Fasteners

 

Olden Enterprises RTC (Rate & Total Count) And TC (Total Count) Counters Are Fully Electronic With No Moving Parts. Both Feature Very Large And Bright Led Displays. The Display Can Easily Be Read From 15 Feet Away.

  • The Sensor Counts Using Invisible Infrared Light. Nothing Ever Touches The Piece
    Being Counted, Which Can Be Up To 2” Away.

  • RTC & TC Counters Have An Electronic Memory That Uses Advanced Electronic
    Circuitry To Retain The Count. There Is No Battery That Ever Needs Replacement!

  • The RTC Counter Display Can Be Switched To Display The Count Rate In Pieces Per
    Hour. The Rate Function Is Displayed Until The Next Push Of The Count/Rate Switch.

  • Sensor Has A 10’ Curly Cord And Mounts With Its Own Magnet. Adapters Are Provided
    For Non-Magnetic Surfaces.

  • Counters Come With A New Generation Sensor And Standard 6” Post Mount.

  •  Counter Body Is Compact And Easy To Install Without Tools.
     

The Counters Are Used On Folders, Stitchers, And Other Bindery Equipment, As Well As Various Inserters, Mailing Machines, Etc. They Mount To The Machine With One Of Four Available Mounts. The Half-Round At The End Of The Post Slides Into A Matching Hole In The Bottom Of The Counter Case. The Post Mount Slides Over Any Vertical Edge Up To 5/8” Thick And Is Secured By A Thumbscrew.

Optional Mounts: The Magnetic Base Mount Features An Adjustable Post, Which Attaches With A Strong Magnet To A Horizontal Surface And Has The Short Post That Can Be Tilted Up/Down And Locked In Place. This Allows The Display To Be Aimed At The Operator’s Eyes. The Vertical Magnetic Base Mount (Not Pictured) Has A Straight, Non-Adjustable Post And Is Designed To Allow The Counter To Be Mounted On Vertical Surfaces. The Adjustable Post Mount Has A Short Post That Can Be Tilted Up/Down And Locked In Place, Aiming The Display At The Operator’s Eyes.
 

Specifications:

Power Requirements: 110 Volts, 60 Hz, 5 Watts
Maximum Counting Speed: 200,000+ Per Hour
Maximum Count: 999,999
Counter Size: 5.5”W X 3.5”H X 2.3”D
Sensor Size: 1.5” X 1” X .6”
Each Counter Is Bench Tested For 100 Hours, And Includes A One-Year Warranty On Parts, Materials And Workmanship.
 

 

 

The Olden Enterprises Batch Counter Is A Seven Digit Total Counter, Two Rate Meters And Job Time Display In One Compact, Easy To Operate Unit. Four Digit Maximum Batch Size. Variable Delay Time Controls Feeder Or Conveyor. The Counter Body Can Be Ordered With Different Accessory Packages For Use On Folders, Stitchers, Inserters, Etc. Easy To Install On Most Baum, O&M, MBM, Stahl & MBO Folder Models. Uses The Same Mounts Shown Above. Contact Your Olden Enterprises Dealer Or The Factory For Details On Selecting The Accessory Package For Your Application.
 

Specifications:
Max. Counting Speed: 400,000+ Per Hour
Max. Rate Displayed: 90,000 Per Hour
Power Required: 110 Volts, 60 Hz, 5 Watts
Running Time Displayed: 99.99 Hours
Max. Total Count: 9,999,999
Preset Batch Delay: 0.1 - 9.9 Seconds
Preset Batch Size: 1 - 9999
Counter Size: 5.5”W X 3.5”H X 2.3”D

Sensor Size: 1.5” X 1” X .6”

 

Download Brochure Below